top of page

The EX10 is a very compact 2-way, high-output, full range active speaker system. Despite its 10" woofer and remarkably small footprint it successfully takes on many larger 12" models and is favored by audio visual and rental companies all over the world for its sheer quality and tremendous output. On-board electronics ensure fast, easy set up and complete control with electronic crossovers, phase alignment, equalization and speaker protection integrated into the EX10’s amplifier module.



  • Professional, Baltic birch construction with wear resistant polymer coating
  • 126dB sustained output, 129dB peak with very high dynamic range and low noise floor
  • 500W of total power with complete on-board speaker management system
  • 450W high efficiency, current enhancing, switching low frequency amplifier
  • Very high quality 50W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output
  • Compact, asymmetrical, trapezoidal cabinet design allows for use in stage monitor or under balcony applications with high pass filter to adjust equalization and phase response
  • Wide dispersion, 100° H x 80° V rotatable horn
  • 1.75" (44 mm) Titanium diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnet structure
  • 10" woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity
  • Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, OmniMountTM bracket point and four M6 bracket points
  • Four additional M10 suspension points for flexible rigging and installation options
  • Top hat for pole mounting applications
  • LED indicators for signal present, limiter, thermal condition and power ON status


System Acoustic Performance

Max SPL Long-term126dB
Max SPL Peak129dB
-3dB Response65Hz to 20kHz
-10dB Response55Hz to 28kHz
Crossover Point1.6kHz

High Frequency Section

Acoustic DesignHorn Loaded
High Horn Coverage Horizontal / Vertical100° x 80°
Rotatable HornYES
Throat Exit Diameter / Diaphragm Size1" / 1.75"
Diaphragm MaterialTitanium
Magnet TypeNeodymium

High Frequency Amplifier Specification

TypeClass AB Push-Pull
Rated Continuous Power50W
Operating Bandwidth1.6kHz to 28kHz

Low Frequency Section

Acoustic DesignFront Loaded, Bass Reflex
Woofer Size / Voice Coil Diameter / Design10" / 2.5" / Trans Coil
Diaphragm MaterialEpoxy Reinforced Cellulose
Magnet TypeNeodymium

Low Frequency Amplifier Specification

TypeHigh efficiency, Current-enhancing switch mode
Rated Continuous Power450W
Operating Bandwidth55Hz to 1.6kHz

Signal Input

Input Sensitivity0.775V RMS
Input Impedance20 kΩ

Power Requirements

Power ConnectorNeutrik PowerCon®
Operating Voltage Range100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage6A 115V | 3A 230V | 3A 250V


Cabinet MaterialBaltic birch
Pole Mount3 5mm
Color"Orange peeled" Matt Black or any RAL

Physical Dimensions

Height514 mm (20.23")
Width310 mm (12.20")
Depth326 mm (12.83")
Weight22 kg (48.4lbs)

KV2 EX10