The EX2.2 is a double 12", compact, active subwoofer system. On- board electronics include a stereo crossover with high pass outputs and full overdrive protection. Featuring KV2 Audio’s switching amplifier technology, precision manufactured woofer designs and a high efficiency, twin chamber acoustic design, the EX2.2 delivers tight, fast, controlled bass response at very high output levels from a small cabinet footprint.
 
Features
Professional, Baltic birch construction with wear resistant polymer coating
130dB sustained output, 133dB peak
1000W high efficiency, current-enhancing, switching, low frequency amplifier
Complete on board subwoofer management including equalization, crossover filters, amplifier overdrive protection, output level and phase controls
Excellent reproduction of bass frequencies with high transient content at high output levels
Stereo or Mono inputs with through signal outputs and 120Hz High Pass outputs
Two 12" high output, low frequency drivers with 3" (75 mm) inside/outside, epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures
Two recessed side handles for simplified handling and carrying
Acetyl copolymer, high impact, low friction feet are located on two sides allowing lock-in and easy cabinet movement
Two internal corner braces with four M10 suspension points
M20 top hat for pole mounting applications
LED indicators for signal present, limiter, thermal condition and power ON status
 
System Acoustic Performance
Max SPL Long-term
130dB
Max SPL Peak
133dB
-3dB Response
45Hz to 125Hz
-10dB Response
40Hz to 125Hz
Crossover Point
125Hz
Low Frequency Section
Acoustic Design
Twin Asymmetrical loading
Number of Drivers
2
Woofer Size / Voice Coil Diameter / Design
12" / 3" / Inside outside
Diaphragm Material
Epoxy Reinforced Cellulose
Magnet Type
Neodymium
Low Frequency Amplifier Specification
Type
High efficiency, Current-enhancing switch mode
Rated Continuous Power
1000W
Distortion
<0.05%
Operating Bandwidth
40Hz to 125Hz
Signal Input
Input Channels
2
Input Sensitivity
1.0V RMS
Input Impedance
20kΩ (balanced)
Signal Output
Signal Output Channels
Mid/High, Through
Features
Input Level Control
-6 - +6dB
Phase
0° / 180°
RMS Limiter
YES
Power Requirements
Power Connector
Neutrik PowerCon®
Operating Voltage
115V / 230V / 250V
Operating Voltage Range
100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage
10A 115V | 5A 230V | 5A 250V
Cooling
Passive
Cabinet
Cabinet Material
Baltic birch
Handles
2
Pole Mount
M20
Color
"Orange peeled" Matt Black or any RAL
Physical Dimensions
Height
491 mm (19.33")
Width
594 mm (23.38")
Depth
616 mm (24.25")
Weight
49 kg (107.8lbs)